Pipeline Repair: Considerations for Determining the Most Appropriate Method

pipeline installation


Pipelines are an essential medium to transport oil and gas all over the country. Pipeline installation in India has led to successful transportation of these crucial yet flammable commodities through a vast network of on- and offshore pipelines. Regular inspections and maintenance ensure that any damage due to corrosion or leaks can be repaired in time.


Pipelines are used to distribute petroleum products and natural gas liquids and thus their safety is a critical factor to be considered during pipeline installation. To ensure the integrity of the pipelines, regular maintenance and repairs must be performed to ensure optimum performance and avoid system failures. 


Regular inspections are required for two reasons:


  1. Any defect during the oil or gas pipeline installation that goes undetected can cause deterioration or cause a leak that can be dangerous. 

  2. Most of the pipelines run underground. They cross over barriers as well. Though link and end seals ensure that no outside particle enters the main pipe, these pipelines run for years, and over a period of time pipelines can be damaged during internal or external corrosion. 

 

Once a defect is identified in the gas or oil pipeline installation, the next step is to determine how to repair it. 


What are the options for pipeline repair?


Technology advancement may try and mitigate the causes of pipeline damage, but the pipelines run for years, and thus at some point in the lifespan of a pipeline it would need an underground pipeline leak repair.


Sleeve repair: Pipeline installation companies may choose this method when a broken section of pipe can be cut out and extracted, then a section of new pipe can be inserted. But, this is the most costly and time-consuming option. In this method, closing off the pipeline is necessary to isolate and cut out the damaged section. The repair procedure takes a long time, and the pipeline must be tested and inspected before it can be turned back on.


Type A and Type B are the two types of repair methods. Type A sleeves are made by assembling two halves of a steel cylinder and welding them together to enclose the damaged section of the pipe. Sleeves of type B are similar to sleeves of type A, with the exception that the ends of the sleeves are welded to the pipe in a full encirclement fashion with fillet welds. The benefits of using Type A sleeves have to do with the fact that they can be temporary or permanent, and the need for a nondestructive inspection is not required. Type B sleeves are ideal for underground pipeline leak repair and reinforcing defects that are circumferential in orientation.


Hot tap section: This method involves cutting into a pipeline or drilling and then welding. Corrosion-related deterioration post oil or gas pipeline installation can be fixed using the hot tapping method. A mechanical bolt-on clamp is used to remove the affected area. In addition to avoiding environmental damage and the release of greenhouse gases, such as methane, this type of welding can be executed without temporarily switching off the pipeline.


Picking the right method


All of the above are recognized methods of repair, however, all of the above may not be applicable in every situation. Similarly, some of them may require a special procedure. Some of the methods may not be feasible while the others may not be cost-effective. To determine whether a method of repair is acceptable as per industry standards it is important to take into account its limitations, as well as whether it is feasible in the context of the specific case.


  1. What is the level of the defect and how is it affecting the welded joints that may be put together by a link or end seal? If it is just dents or external corrosion then it can be fixed by sleeve repair without cutting and replacing the pipeline.

  2. Is the pipeline leaking and does it require an underground pipeline leak repair? 

  3. Size of the area that needs to be repaired? The leak may be where the link seal is placed at any crossing or can be in the casing. The larger the defect the method has to be fast and effective to curtail the leak. 

  4. Availability of the right resources. Repair methods that require qualified people and equipment that are hard to obtain may make the option non-feasible. 

  5. What is the regulatory requirement? A qualified welder must perform some repairs in oil or gas pipeline installation, such as the deposition of weld metal, according to regulations.


RACI in association with the Primus Line® system, offer solutions for trenchless rehabilitation of pipelines. It’s a fast and cost-effective method of repairing underground pipelines without excavating.

Comments

Post a Comment

Popular posts from this blog

Features and Benefits of Pipeline Transportation

Image
Oil and gas pipelines are vital infrastructure elements that play a crucial role in the distribution of important resources like crude oil, petroleum and natural gas. Countries depend on pipelines for their energy needs and industrial applications. Made of steel or polyethylene and installed with link seals and end seals for the perfect vacuum, these pipes safely transport large quantities of petroleum and crude oil derivatives for residential, commercial and industrial use across large distances.  It’s safe to say that pipelines are the desired way to transport such large quantities of resources. When we compare this mode of transportation to others such as by air, sea or railways, our previous point becomes abundantly clear.  Comparing Pipelines to Regular Types of Transportation Oil and gas pipelines can seamlessly transport huge quantities of resources directly from the wells to the end-user at a much lower cost than other means of transport.  The payload is usuall...
Read more

Benefits of using pipe wear pads

Image
  Before getting to know about the benefits of pipe wear pads, let’s start off with what are pipe wear pads? Pipe wear pads are pipeliners that are used on the outer diameter of the pipe structure. The pipe wear pads are usually made out of Fiber-reinforced polymer also known as fiber-reinforced liner. These are fitted in such a manner that it acts as a support structure for the pipeline where the vibrations in the pipeline rub against each other at a defined distance according to the entire pipeline layout. It is used in the installation of gas pipelines, oil pipelines, water substance pipelines , etc.  The pipe wear pads are also recognized by names like wear pads, pipe pads, or FPR pads for short forms. The greater use of these pads is worn resistance, noise reduction, greatly reduced friction, and high strength. Mostly used in industrial installations.  A gentle reminder, it’s important to get your pipeline systems a check-up from the specialists in case it needs assi...
Read more

Pipeline rehabilitation Vs Repiping- What is a better approach?

Image
  Pipeline installations done ages ago to transport fuel, water or gas need constant monitoring. Casing insulators are used to insulate and provide long-term protection from corrosion. Due to aging, they are at constant risk of corrosion or leaks. The damage caused to these pipelines is not only losing the resources but also the environmental harm they will cause due to leaks or eruptions. The question of whether to go for rehabilitation or repiping becomes critical for pipeline installation companies . It is important to access the pros and cons of both to come to a decision. Cost is a critical factor Pipeline rehabilitation and repiping both have a cost attached to them. Both labor and material costs should be considered before making the decision. While rehabilitation may be beneficial for the short term and may cost less than repiping it is important to take into account the cost of shutting down the pipeline for rehabilitation. The interruption during repair may also lead t...
Read more